#Pixelstick install#

If left blank, a hostname will be auto-generated. Hostname is the network hostname you want to use for this device.

Hostname and Device ID are optional and may be changed later from the Web UI.

Fill in SSID and Passphrase with the credentials for your network.

If a CH340 device is not available, then either your system does not have the drivers loaded (refer to Requirements) or you have a power-only USB cable. Verify that you can select a CH340 device from the Serial Port drop-down list.

Extract the zip file archive and launch ESPSFlashTool.jar.

You want to download ESPixelStick_Firmware-X.X.zip.

Make sure you follow the link above for the latest stable release.

Download the latest stable release from the official repository.

Many phone charger cables only have the power lines connected.

Make sure that your Micro-USB cable is a data cable.

Connect the Wemos module to your computer utilizing a Micro-USB cable.

Remove the Wemos module from the main board.

(Linux and MacOS only) Python 3 – installed by default in current distros.

CH340 Driver (not required for MacOS Mojave 10.14 or greater).

#Pixelstick install#

Please check if your device connects before trying to install any drivers as your system may already have them installed: In order to program the ESPixelStick, you’ll need the following installed on your system. To program the ESPixelStick, you need to remove the Wemos module from the main board. The top module, which is a Wemos D1 mini and the ESPixelStick main board which act as a mother board for the Wemos module. The ESPixelStick V3 consists of two parts.

Programming the ESPixelStick V3 is quite simple. The ESPixelStick V3 is only available from our Store.